Aquamiser Garden Watering System

Installation Guides for Systems

Drips for Baskets, Boxes and Pots : Drips for Borders
Greenhouse : Vegetables : Sprays

Select the installation guide for your system from the options above.

You will need a Stanley-type knife to cut the supply or feeder tube and a kettle or pan of hot (not boiling) water to soften the tube when connecting fittings.

Making holes in the Supply Tube The pointed end of the ground spike of any Assembly or of Tube Support code 587 makes the right hole in our Supply Tube. Alternatively use a small pointed instrument to make a pilot hole, then a crosshead screwdriver or similar to enlarge it to 4mm maximum.

For other frequently-asked questions please see FAQ.


Aquamiser is part of The Portuguese Portfolio Group. Regret no printed brochure
Phone 0560 366 2435 Fax 0870 762 6078 © The Portuguese Portfolio Ltd 1997-2010